Sugarcane Crusher Double Mill

Product Details:

om kailash no. 5 – jumbo heavy king size extra heavy model

double mill with planetary gear boxes & motors

cane carrier & bagasse carrier etc

305 mm length x 285 mm dia - size -12” × 11” 

cane carrier shall be 12” wide and length will be 20 feet. Complete with m. S. Structure & frame work. 

mill foundation for both mills fabricated from 7”x3” channel.

mill base fabricated from 6”x 3” channel.

side plates shall be fabricated from tested mild steel plates. Side plates are mounted on the base frame provided with the mill.

mill roller shall be cast iron to be fitted on tested m. S. Shaft conforming to en-8 or equivalent is standard.

size of roller –  12” length x 11” dia nominal size

6- c. I. Roller, 2-mills,

top studs are to hold the top caps to avoid roller movement and side studs are long and throughout the side plates both sides to hold the side caps. Setting keys are to adjust the brackets for roller setting.

top halter shall be of mild steel with spring for up & down movement for the rollers to generate pressure on sugarcane.

side caps shall be of mild steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top bushing with two bolts which are only for securing the cap in its working position.

top roller bushing shall be made out of phosphorous bronze. Bushings have brackets which embrace the mill side plates having about 1. 5 mm lateral play. Side roller bushing shall be of m. S. Brackets lined with phosphorous bronze metal.

automatic grease lubricating system is to lubricate grease to all the bushings at a time when required and there is a timing system to adjust when to do lubricating. With 0. 5 h. P. Electric motor.

a,b roller scrapers shall be of mild steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

c-roll scraper shall be of mild steel construction fitted with mild steel c-roll scraper stand with means of adjustment in horizontal direction from the outside. C-roll scraper shall be grooved to match the rollers.

coupling jointer are made of cast iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

intermediate carrier shall be 12” wide assuring m. S. Side plates, inter carrier rubber belt, supporting rollers, sprockets & chains. It shall be driven by mill.

sugarcane feeder shall be mils steel.

sugarcane bagasse exit window shall be fabricated from mild steel plates.

crusher side gear shall be having hub cut 12 teeth.

crusher side cover shall be fabricated from m. S. Sheet.

juice collecting bottom tray shall be mild steel.

juice sewer shall be mild steel.

1^st mill will be driven by planetary gear box with 25 h. P. Electric motor.

2^nd mill will be driven by planetary gear box with 20 h. P. Electric motor.

bagasse carrier shall be 14” wide and length will be 20 feet complete with m. S. Structure & frame work. It shall be driven by 2^nd mill.

foundation bolts for the mills will be provided.

spanner set. Heavy duty, new system.

crushing capacity -2350-2500 kgs per hour / 60 tons for 24 hours

total h. P. = 25+20+0.5 = 45.5 h. P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 SETS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

om kailash no. 5 – jumbo heavy king size extra heavy model

double mill with planetary gear boxes & motors

 size -12” × 11”

mill foundation for both mills fabricated from 7”x3” channel.

mill base fabricated from 6”x 3” channel.

side plates shall be fabricated from tested mild steel plates. Side plates are mounted on the base frame provided with the mill.

mill roller shall be cast iron to be fitted on tested m. S. Shaft conforming to en-8 or equivalent is standard.

size of roller – 12” length X 11” dia nominal size

6- c. I. Roller, 2-mills,

top studs are to hold the top caps to avoid roller movement and side studs are long and throughout the side plates both sides to hold the side caps. Setting keys are to adjust the brackets for roller setting.

side caps shall be of mild steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top bushing with two bolts which are only for securing the cap in its working position.

top roller bushing shall be made out of phosphorous bronze. Bushings have brackets which embrace the mill side plates having about 1. 5 mm lateral play. Side roller bushing shall be of m. S. Brackets lined with phosphorous bronze metal.

a,b roller scrapers shall be of mild steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

c-roll scraper shall be of mild steel construction fitted with mild steel c-roll scraper stand with means of adjustment in horizontal direction from the outside. C-roll scraper shall be grooved to match the rollers.

coupling jointer are made of cast iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

intermediate carrier shall be 12” wide assuring m. S. Side plates, inter carrier rubber belt, supporting rollers, sprockets & chains. It shall be driven by mill.

sugarcane feeder shall be mils steel.

sugarcane bagasse exit window shall be fabricated from mild steel plates.

crusher side gear shall be having hub cut 12 teeth.

crusher side cover shall be fabricated from m. S. Sheet.

juice collecting bottom tray shall be mild steel.

juice sewer shall be mild steel.

1^st mill will be driven by planetary gear box with 25 h. P. Electric motor.

2^nd mill will be driven by planetary gear box with 20 h. P. Electric motor.

foundation bolts for the mills will be provided.

spanner set. Heavy duty, new system.

crushing capacity - 45/50 tons for 24 hours

total h. P. = 25+20 = 45 h. P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 PCS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

om kailash no. 5 – jumbo heavy king size model 

double mill with planetary gear boxes & motors & Spring

305 mm length - 285 mm dia –  size -12” × 11”

mill foundation for both mills fabricated from 6”x3” channel.

mill base fabricated from 6”x 3” channel.

side plates shall be fabricated from tested mild steel plates duly stress relieved. Side plates are mounted on the base frame provided with the mill.

mill roller shall be cast iron to be fitted on tested m. S. Shaft conforming to en-8 or equivalent is standard. All the top rollers shall have cross type coupling end. The rollers shall have v-grooving (radial grooving). Juice groove shall be provided on the bottom rollers

size of roller – 12” length x 11” dia. nominal size

6- c. I. Roller, 2-mills,

a-   length - 305 mm - roller dia - 285 mm  

b-   roller length - 305 mm - dia - 285 mm 

c-    roller length - 305 mm - dia - 267 mm

top studs are to hold the top caps to avoid roller movement and side studs are long and throughout the side plates both sides to hold the side caps. Setting keys are to adjust the brackets for roller setting.

top halter shall be of mild steel with spring for up & down movement for the rollers to generate pressure on sugarcane.

side caps shall be of mild steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top bushing with two bolts which are only for securing the cap in its working position.

top roller bushing shall be made out of phosphorous bronze. Bushings have brackets which embrace the mill side plates having about 1. 5 mm lateral play. Side roller bushing shall be of m. S. Brackets lined with phosphorous bronze metal.

heavy & big cast iron grease cup with m. S. Pipes for greasing on all the bushings.

a,b roller scrapers shall be of mild steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

c-roll scraper shall be of mild steel construction fitted with mild steel c-roll scraper stand with means of adjustment in horizontal direction from the outside. C-roll scraper shall be grooved to match the rollers.

coupling jointer are made of cast iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

intermediate carrier complete with side plates, rubber belt, rollers, sprockets & chains.

sugarcane feeder shall be mils steel.

sugarcane bagasse exit window shall be fabricated from mild steel plates.

crusher side gear shall be having hub cut 12 teeth.

crusher side cover shall be fabricated from m. S. Sheet.

juice collecting bottom tray shall be mild steel.

juice sewer shall be mild steel.

1^st mill will be driven by planetary gear box with 25 h. P. Electric motor.

2^nd mill will be driven by planetary gear box with 20 h. P. Electric motor.

foundation bolts for the mills will be provided.

spanner set. Heavy duty, new system.

crushing capacity -45 tons for 24 hours.

total h. P. = 25+20 = 45 h. P.

Additional Information:

• Production Capacity: 5 PCS PER MONTH
• Delivery Time: 2-3 WEEKS

Product Details:

Additional Information:

• Production Capacity: 2 SETS PER MONTH
• Delivery Time: 1 MONTH

Product Details:

mills-2, c. I. Graded rollers – 6.

mill base fabricated from m. S. Channels.

mill foundation for both mills fabricated mild steel channels.

side plate fabricated from tested mild steel plates.

110 mm thick graded m. S. Shafts.

gun metal top roller bush half square/half round.

top caps fabricated from m. S. Plates.

side caps fabricated from m. S. Plates.

long studs to hold the side caps from the both sides.

setting keys for b&c roller halter to avoid movement.

heavy & big grease cup & pipes.

a,b roller scrapers fabricated from m. S. Plates.

c-roll scraper stand & c-roll scrape fabricated m. S. Plates.

crusher side gear shall be having hub cut 13 teeth.

crusher side cover shall be fabricated from m. S. Sheet.

sugarcane bagasse exit window shall be fabricated from mild steel plates.

juice collecting bottom tray shall be mild steel covered with s. S. Sheet.

juice gutter shall be stainless steel.

intermediate carrier side plates shall be mild steel, type – belt type driven by mills with sprockets and chain.

1^st mill planetary gear box with 15 h. P. Electric motor.

2^nd mill planetary gear box with 15 h. P. Electric motor.

crushing capacity appx 30-35 ton for 24 hours.

coupling rpm -7 / 8.

motor  h. P.   required – 15 +15 = 30 h. P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 2 SETS PER MONTH
• Delivery Time: 4 WEEKS

Product Details:

Mill Foundation for both Mills Fabricated from 5x2.5 channel.

Mill base fabricated from 5x 2.5 channel.

Side Plates shall be fabricated from tested mild steel plates. Side Plates are mounted on the base frame provided with the mill.

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard.

Size of Roller  9.75 Dia. x 10 Length Nominal size

6- C.I. Roller, 2-mills.

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

Automatic Grease Lubricating system is to lubricate Grease to all the bushings at a time when required and there is a timing system to adjust when to do lubricating. With 0.5 H.P. Electric motor.

A,B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

Intermediate Carrier shall be 10 wide assuring M.S. Side Plates, Inter Carrier Rubber Belt, Supporting Rollers, Sprockets & Chains. It shall be driven by mill.

Sugarcane Feeder shall be Mils Steel.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Crusher Side Gear shall be having hub cut 12 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Juice Collecting bottom Tray shall be Mild Steel.

Juice Sewer Shall Be Mild Steel.

Both Mills will be Driven by Planetary Gear box with 15 H.P. Electric Motor.

Foundation Bolts for the Mills will be provided.

Spanner Set. Heavy Duty, New System.

Crushing Capacity - 30-35 Tons For 24 Hours

Total H.P. = 15+15 = 30 H.P.

Additional Information:

• Production Capacity: 3 NOS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

Additional Information:

• Production Capacity: 5 SETS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

^{OM KAILASH NO. 6 
SUPER JUMBO- TOTAL HEAVY-CHOTTU MODEL} 

^{DOUBLE MILL WITH PLANETARY GEAR BOXES, MOTORS, CANE CARRIER & BAGASSE CARRIER ETC}

^{356 MM LENGTH  305 MM DIA - Size -14" × 11"} 

Cane Carrier shall be 14 wide and length will be 20 feet. Complete with M.S. structure & frame work. 

Mill Foundation for both Mills Fabricated from 6x3 channel.

Mill base fabricated from 6x 3 channel.

Side Plates shall be fabricated from tested mild steel plates. Side Plates are mounted on the base frame provided with the mill.

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard.

Size of Roller  14" Length x 11" Dia. Nominal size

6- C.I. Roller, 2-mills,

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

Top halter shall be of Mild Steel with Spring for up & down Movement for the rollers to generate pressure on Sugarcane.

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

Automatic Grease Lubricating system is to lubricate Grease to all the bushings at a time when required and there is a timing system to adjust when to do lubricating. With 0.5 H.P. Electric motor.

A,B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

Intermediate Carrier shall be 12 wide assuring M.S. Side Plates, Inter Carrier Rubber Belt, Supporting Rollers, Sprockets & Chains. It shall be driven by mill.

Sugarcane Feeder shall be Mils Steel.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Crusher Side Gear shall be having hub cut 12 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Juice Collecting bottom Tray shall be Mild Steel.

Juice Sewer Shall Be Mild Steel.

1^ST Mill will be Driven by Planetary Gear box with 25 H.P. Electric Motor.

2^ND Mill will be Driven by Planetary Gear box with 25 H.P. Electric Motor.

Bagasse Carrier shall be 18 wide and length will be 20 feet complete with M.S. Structure & frame work. It shall be driven by 2^nd Mill.

Foundation Bolts for the Mills will be provided.

Spanner Set. Heavy Duty, New System.

Crushing Capacity - 65-70 Tons For 24 Hours

Total H.P. = 25+25+0.5 = 50.5 H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 3 SETS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

_{B-     Roller Dia - 356 mm – Length - 356 mm
C-     Roller Dia - 347 mm – Length - 356 mm,
STUDS AND SETTING KEYS}

_{Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.}

 TOP HOLTER & SPRING SYSTEM
Top halter shall be of Mild Steel with Spring system for rollers. It is to move up and down when there is a load on the roller.
SIDE CAPS
_{Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.}
TOP AND SIDE BUSHING
_{Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal}
A+B ROLLER SCRAPERS
_{The scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.}
C-ROLL SCRAPER & STAND
_{C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.}
COUPLING & TELL BAR
_{Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling}
SIDE GEAR

_{Each roller shall be fitted with Mild Steel Side Gears (Crown Pinions)}
Crusher side covers shall be fabricated from M.S. Sheet.

<sub>Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.
Juice Collecting bottom Tray shall be Mild Steel.
Intermediate Carrier Complete with side plates, Rubber Belt, Rollers, Sprockets & Chains
Double Coupling - Rpm -7 / 8.
Tell Bar system to couple the Gear Box with Crusher with Coupling.
Foundation Bolts for the Mills will be provided
Spanner Set.
Juice Sewer shall be Mild Steel. 

Driven by Planetary Gear boxes & 30 h.p. motors

AUTOMATIC  GREASE LUBRICATING SYSTEM

Bagasse Carrier</sub>

Total H.P. Required for Milling Plant – 30+30+3+0.5= 63.5 H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1 ET PER MONTH
• Delivery Time: 4-5 WEEKS

Product Details:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1 SET PER MONTH
• Delivery Time: 5-6 WEEKS

Product Details:

Additional Information:

• Production Capacity: 1 SET PER MONTH
• Delivery Time: 5-6 WEEKS

Product Details:

Additional Information:

• Production Capacity: 1 SET IN 6 WEEKS
• Delivery Time: 6 WEEKS

Product Details:

Additional Information:

• Production Capacity: 1 SET IN 6 WEEKS
• Delivery Time: 6 WEEKS

Product Details:

_{OM KAILASH NO. 3 – DELUX SMART TOTAL HEAVY MODEL 
DOUBLE MILL WITH PLANETARY GEAR BOXES & MOTORS
CANE CARRIER & BAGASSE CARRIER, ALS & SPRING
Size -9.75” × 10” - 247 mm – Length - 254 mm}

Cane Carrier shall be 10” wide and length will be 20 feet. Complete with M.S. structure & frame work. It shall be driven by Mill.

Mill Foundation for both Mills Fabricated from 5”x2.5” channel.

Mill base fabricated from 5”x 2.5” channel.

Side Plates shall be fabricated from tested mild steel plates. Side Plates are mounted on the base frame provided with the mill.

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard.

Size of Roller – 9.75” Dia. x 10” Length Nominal size

6- C.I. Roller, 2-mills.

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

A,B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

Intermediate Carrier shall be 10” wide assuring M.S. Side Plates, Inter Carrier Rubber Belt, Supporting Rollers, Sprockets & Chains. It shall be driven by mill.

Sugarcane Feeder shall be Mils Steel.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Juice Collecting bottom Tray shall be Mild Steel.

Juice Sewer Shall Be Mild Steel.

Both Mills will be Driven by Planetary Gear box with 15 H.P. Electric Motor.

Bagasse Carrier shall be 14” wide and length will be 20 feet complete with M.S. Structure & frame work. It shall be driven by 2^nd Mill.

Foundation Bolts for the Mills will be provided.

Spanner Set. Heavy Duty, New System.

Crushing Capacity - 30-35 Tons For 24 Hours

Total H.P. = 15+15 = 30 H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 3 PCS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

_{FOUNDATION FOR BOTH MILLS WILL BE FABRICATED FROM}

_{6”X 3” M.S. SCHANNELS}

_{MILL BASE FABRICATED FROM 6”X 3” M.S. SCHANNELS.}

_{SIDE PLATES}

Ø  _{MILL ROLLERS & SHAFTS
Cast iron Rollers fit on ultrasonically tested M.S. Shaft conforming to EN-8 or equivalent IS standard.} 
Size of Roller – 11” Length x 14” Dia. Nominal size
6- C.I. Roller, 2-Mills,
A-     Roller Dia - 280 mm – Length - 356 mm,
B-     Roller Dia - 280 mm – Length - 356 mm,
C-     Roller Dia - 267 mm – Length - 356 mm, 

Ø  _{STUDS AND SETTING KEYS}

_{Ø TOP HOLTER & SPRING SYSTEM}

_{Top halter shall be of Mild Steel with Spring system for rollers. It is to move up and down when there is a load on the roller.}

_{Ø  SIDE CAPS}

_{Ø  TOP AND SIDE BUSHING}

_{Ø  GREASE CUP & PIPES}

Ø  _{A+B ROLLER SCRAPERS}

_{Ø  C-ROLL SCRAPER & STAND}

_{Ø  COUPLING & TELL BAR}

_{Ø SIDE GEARS}

_{Ø  Crusher side covers shall be fabricated from M.S. Sheet.}

_{Ø  Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.}

_{Ø  Juice Collecting bottom Tray shall be Mild Steel.}

_{Ø  Intermediate Carrier Complete with side plates, Rubber Belt, Rollers, Sprockets & Chains.}

_{Ø  Double Coupling - Rpm -7 / 8.}

_{Ø  Tell Bar system to couple the Gear Box with Crusher with Coupling.}

_{Ø  Foundation Bolts for the Mills will be provided.}

_{Ø  Spanner Set.}
Juice Sewer shall be Mild Steel.

_{PLANETARY GEAR BOXES WITH MOTORS}

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 2 SET PER MONTH
• Delivery Time: 1 MONTH