Sugarcane Crushers

Product Details:

<sub>OM KAILASH NO.6 SUPER JUMBO TOTAL HEAVY MOTTU MODEL  
SUGARCANE CRUSHER DOUBLE MILL WITH PLANETAR GEAR BOXES, MOTORS, CANE CARRIER, BAGASSE CARRIER ETC. 

Cane carrier having dia of 14" Length of 27 Feet with M.S. Structure and all required accessories. Driven by Planetary Gear Box & Motor

 MILL FOUNDATION FOR BOTH MILLS FABRICATED FROM 8”X 3” CHANNEL.
MILL BASE FABRICATED FROM 8”X 3” M.S. CHANNELS.
SIDE PLATES</sub>
Side Plates shall be fabricated from tested mild steel plates duly stress relieved. Side Plates are mounted on the base frame provided with the mill.
 MILL ROLLERS & SHAFTS
Cast iron Rollers fit on ultrasonically tested M.S. Shaft conforming to EN-8 or equivalent IS standard. 
Size of Roller – 14” Dia. x 14” Length Nominal size
6- C.I. Roller, 2-mills,
A-     Roller Dia - 356 mm – Length - 356 mm,

_{B-     Roller Dia - 356 mm – Length - 356 mm
C-     Roller Dia - 347 mm – Length - 356 mm,
STUDS AND SETTING KEYS}

_{Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.}

 TOP HOLTER & SPRING SYSTEM
Top halter shall be of Mild Steel with Spring system for rollers. It is to move up and down when there is a load on the roller.
SIDE CAPS
_{Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.}
TOP AND SIDE BUSHING
_{Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal}
A+B ROLLER SCRAPERS
_{The scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.}
C-ROLL SCRAPER & STAND
_{C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.}
COUPLING & TELL BAR
_{Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling}
SIDE GEAR

_{Each roller shall be fitted with Mild Steel Side Gears (Crown Pinions)}
Crusher side covers shall be fabricated from M.S. Sheet.

<sub>Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.
Juice Collecting bottom Tray shall be Mild Steel.
Intermediate Carrier Complete with side plates, Rubber Belt, Rollers, Sprockets & Chains
Double Coupling - Rpm -7 / 8.
Tell Bar system to couple the Gear Box with Crusher with Coupling.
Foundation Bolts for the Mills will be provided
Spanner Set.
Juice Sewer shall be Mild Steel. 

Driven by Planetary Gear boxes & 30 h.p. motors

AUTOMATIC  GREASE LUBRICATING SYSTEM

Bagasse Carrier</sub>

Total H.P. Required for Milling Plant – 30+30+3+0.5= 63.5 H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1 ET PER MONTH
• Delivery Time: 4-5 WEEKS

Product Details:

OM KAILASH NO. 3 – DELUXE HEAVY MODEL 
SUGARCANE CRUSHER WITH PLANETARY GEAR BOX & MOTOR 
242 MM DIA – 242 MM LENGTH - Size -9½” x 9½”  

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 242 mm – Length - 242 mm,

B - Roller Dia - 242 mm – Length - 242 mm,

C - Roller Dia - 222 mm – Length - 242 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

100 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Halter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher Side Cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Planetary Gear Box with 15 H.P. Electric Motor -1 NOS.

Spanner Set.

Crushing Capacity -1150-1250 Kgs per hour / 30 Ton for 24 hours

Coupling Rpm-7 / 8
 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 25 NOS PER MONTH
• Delivery Time: 1 WEEK

Product Details:

OM KAILASH NO. 5 – JUMBO HEAVY KING SIZE EXTRA HEAVY MODEL

DOUBLE MILL WITH PLANETARY GEAR BOXES & MOTORS

285 MM DIA – 305 MM LENGTH - Size -11” × 12” - 285 mm – Length - 305 mm 

 

 

Mill Foundation for both Mills Fabricated from 7”x3” channel.

 

Mill base fabricated from 6”x 3” channel.

 

Side Plates shall be fabricated from tested mild steel plates. Side Plates are mounted on the base frame provided with the mill.

 

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard.

 

Size of Roller – 11” Dia. x 12” Length Nominal size

6- C.I. Roller, 2-mills,

 

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

 

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

 

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

 

A,B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

 

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

 

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

 

Intermediate Carrier shall be 12” wide assuring M.S. Side Plates, Inter Carrier Rubber Belt, Supporting Rollers, Sprockets & Chains. It shall be driven by mill.

 

Sugarcane Feeder shall be Mils Steel.

 

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

 

Crusher Side Gear shall be having hub cut 12 teeth.

 

Crusher side cover shall be fabricated from M.S. Sheet.

 

Juice Collecting bottom Tray shall be Mild Steel.

 

Juice Sewer Shall Be Mild Steel.

 

1^ST Mill will be Driven by Planetary Gear box with 25 H.P. Electric Motor.

 

2^ND Mill will be Driven by Planetary Gear box with 20 H.P. Electric Motor.

 

Foundation Bolts for the Mills will be provided.

 

Spanner Set. Heavy Duty, New System.

 

Crushing Capacity -2950-2100 Kgs Per Hour / 50 Tons For 24 Hours

 

Total H.P. = 25+20 = 45 H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 PCS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

OM KAILASH NO. 2 – HEAVY MODEL
SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
203 MM Dia – 203 MM LENGTH - Size -8” x  8”

Mills-1, Cast Iron Graded Rollers – 3.

A-    Roller Dia - 203 mm – Length - 203 mm,

B-    Roller Dia - 203 mm – Length - 203 mm,

C-     Roller Dia - 183 mm – Length - 203 mm,

Mill base fabricated from Mild Steel channels.

Side Plate fabricated from tested mild steel plates.

80 mm Thick Graded M.S. Shafts.

A,B & C Roller Gun Metal Full Round Bush with Holder.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Holder to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Single Coupling - Rpm -7 / 8.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from M.S. Sheet

Tapper Roller  Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Straight, Fast Pulley Pinion Straight,

Crushing Capacity -550-650 Kgs Per Hour / 15 Tons For 24 Hours.

Motor H.P. Required – 5 H.P.,
Diesel Engine H.P. Required – 10 H.P.

 

Additional Information:

• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

^{OM KAILASH NO. 5 –JUMBO HEAVY KING SIZE
SUGARCANE CRUSHER D/C WITH HELICAL GEAR BOX 
267 MM Dia – 305 MM LENGTH - Size -10½” × 12”}

Mill base fabricated from 5”x 2.5” channel.

Side Plates shall be fabricated from tested mild steel plates duly stress relieved. Side Plates are mounted on the base frame provided with the mill.

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard. 

Size of Roller – 10.5” Dia. x 12” Length Nominal size

3- C.I. Roller, 1-mill,

A-   Roller Dia - 267 mm – Length - 305 mm,

B-   Roller Dia - 267 mm – Length - 305 mm,

C-    Roller Dia - 241 mm – Length - 305 mm,

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

Top Caps shall be fabricated from Mild Steel plates and it is to block the roller up and down movement.

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

Heavy & Big Cast Iron Grease Cup with M.S. Pipes for Greasing on all the bushings.

A, B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

Sugarcane Feeder shall be Mils Steel.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Crusher Side Gear shall be having hub cut 14 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Juice Collecting bottom Tray shall be Mild Steel.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from M.S. Sheet

Tapper Roller Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Helical, Fast Pulley Pinion Helical,

Crusher Pulley Plain – 29” x 2” hole, Pulley Rpm -240,

Spanner Set.

Heavy Duty, New System.

Crushing Capacity - 1500-1700 kgs per Hour/40 Tons For 24 Hours.

Motor H.P. Required = 20 H.P.

WITHOUT MOTOR

Additional Information:

• Production Capacity: 10 PCS PER MONTH
• Delivery Time: 1-2 WEEKS

Product Details:

OM KAILASH NO. 5– JUMBO HEAVY KING SIZE EXTRA HEAVY MODEL  

Cane carrier having Length of 38 feet and dia 12" with M.S. Structure having 2 cutters with all required accessories. Driven by 3 H.P. Electric Motor

Foundation For Both Mills Will Be Fabricated From

6”X 3” M.S. channels

Mill Base Fabricated From 5”X 2.5” M.S. channels

SIDE PLATES

Side Plates shall be fabricated from tested mild steel plates duly stress relieved. Side Plates are mounted on the base frame provided with the mill.

MILL ROLLERS & SHAFTS

Cast iron Rollers fit on ultrasonically tested M.S. Shaft conforming to EN-8 or equivalent IS standard. All the top rollers shall have cross type coupling end. The rollers shall have v-grooving (radial grooving). Juice groove shall be provided on the bottom rollers. Each roller shall be fitted with M.S. hub cut teeth Side Gears.

Size of Roller – 11 1/8” Diax 12”Length. Nominal size

6- C.I. Roller, 2-Mills,

A-     Roller Dia - 285 mm – Length - 305 mm,

B-     Roller Dia - 285 mm – Length - 305 mm,

Roller Dia - 267 mm – Length - 305 mm,

STUDS AND SETTING KEYS

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting

SIDE CAPS

Side caps shall be of  Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

TOP AND SIDE BUSHING

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

 A+B ROLLER SCRAPERS

The scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

C-ROLL SCRAPER & STAND

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

COUPLING & TELL BAR

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

TOP HOLTER & PISTON

Top halter shall be of Mild Steel with Piston for Hydraulic Power pack system.

SIDE GEARS

Each roller shall be fitted with Mild Steel Side Gears (Crown Pinions)

Ø  Crusher side covers shall be fabricated from M.S. Sheet.

Ø  Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Ø  Juice Collecting bottom Tray shall be Mild Stee
Ø Intermediate Carrier Complete with side plates, Rubber Belt, Rollers, Sprockets & Chains.

 Ø    Juice Sewer shall be Mild Steel.

Driven by Planetary Gear boxes & Motors with 25 H.P,. & 20 H.P.

Bagasse Carrier having length of 20 feet

Hydraulic Power Pack system

ALS System
Spring System

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 2 SETS PER MONTH
• Delivery Time: 5 WEEKS

Product Details:

OM KAILASH NO. 5 – JUMBO HEAVY KING SIZE MODEL 

DOUBLE MILL WITH PLANETARY GEAR BOXES & MOTORS

285 MM DIA – 305 MM LENGTH - Size -11 1/8” × 12”

 

Mill Foundation for both Mills Fabricated from 7”x3” channel.

 

Mill base fabricated from 6”x 3” channel.

 

Side Plates shall be fabricated from tested mild steel plates duly stress relieved. Side Plates are mounted on the base frame provided with the mill.

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard. All the top rollers shall have cross type coupling end. The rollers shall have v-grooving (radial grooving). Juice groove shall be provided on the bottom rollers

Size of Roller – 11” Dia. x 12” Length Nominal size

6- C.I. Roller, 2-mills,

A-   Roller Dia - 285 mm – Length - 305 mm,

B-   Roller Dia - 285 mm – Length - 305 mm,

C-    Roller Dia - 267 mm – Length - 305 mm,

 

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

 

Top halter shall be of Mild Steel with Spring for up & down Movement for the rollers to generate pressure on Sugarcane.

 

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

 

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

 

Heavy & Big Cast Iron Grease Cup with M.S. Pipes for Greasing on all the bushings.

 

A,B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

 

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

 

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

 

Intermediate Carrier Complete with side plates, Rubber Belt, Rollers, Sprockets & Chains.

 

Sugarcane Feeder shall be Mils Steel.

 

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

 

Crusher Side Gear shall be having hub cut 12 teeth.

 

Crusher side cover shall be fabricated from M.S. Sheet.

 

Juice Collecting bottom Tray shall be Mild Steel.

 

Juice Sewer Shall Be Mild Steel.

 

1^ST Mill will be Driven by Planetary Gear box with 25 H.P. Electric Motor.

 

2^ND Mill will be Driven by Planetary Gear box with 20 H.P. Electric Motor.

 

Foundation Bolts for the Mills will be provided.

 

Spanner Set. Heavy Duty, New System.

 

Crushing Capacity -45 Tons For 24 Hours.

 

Total H.P. = 25+20 = 45 H.P.

Additional Information:

• Production Capacity: 5 PCS PER MONTH
• Delivery Time: 2-3 WEEKS

Product Details:

OM KAILASH NO. 5 – JUMBO HEAVY KING SIZE EXTRA HEAVY MODEL

DOUBLE MILL WITH PLANETARY GEAR BOXES & MOTORS

CANE CARRIER & BAGASSE CARRIER ETC

285 MM DIA – 305 MM LENGTH - Size -11” × 12” - 285 mm – Length - 305 mm

Cane Carrier shall be 12” wide and length will be 20 feet. Complete with M.S. structure & frame work. It shall be driven by Planetary Gear Box with 3 H.P. Electric Motor.

Mill Foundation for both Mills Fabricated from 7”x3” channel.

Mill base fabricated from 6”x 3” channel.

Side Plates shall be fabricated from tested mild steel plates. Side Plates are mounted on the base frame provided with the mill.

Mill Roller shall be Cast iron to be fitted on tested M.S. Shaft conforming to EN-8 or equivalent IS standard.

Size of Roller – 11” Dia. x 12” Length Nominal size

6- C.I. Roller, 2-mills,

Top Studs are to hold the Top Caps to avoid Roller Movement and side Studs are Long and throughout the side plates both sides to hold the Side Caps. Setting Keys are to adjust the Brackets for Roller setting.

Top halter shall be of Mild Steel with Spring for up & down Movement for the rollers to generate pressure on Sugarcane.

Side caps shall be of Mild Steel. Side caps embrace the mill housing and this gives additional strength against any lateral thrust of the top Bushing with two bolts which are only for securing the cap in its working position.

Top roller Bushing shall be made out of phosphorous bronze. Bushings have Brackets which embrace the mill Side Plates having about 1.5 mm lateral play. Side roller Bushing shall be of M.S. Brackets lined with phosphorous bronze metal.

Automatic Grease Lubricating system is to lubricate Grease to all the bushings at a time when required and there is a timing system to adjust when to do lubricating. With 0.5 H.P. Electric motor.

A,B Roller scrapers shall be of Mild Steel and are adjustable. The top scraper of the top roller shall be of floating type. The scraper blades for the juice grooves provided on the feed rollers shall be also adjustable.

C-roll Scraper shall be of Mild Steel construction fitted with Mild Steel C-roll Scraper stand with means of adjustment in horizontal direction from the outside. C-roll Scraper shall be grooved to match the rollers.

Coupling jointer are made of Cast Iron. One coupling will be attached to crusher shaft and the other coupling will be attached to gear box shaft along with tell bar to couple the gear box and crusher coupling.

Intermediate Carrier shall be 12” wide assuring M.S. Side Plates, Inter Carrier Rubber Belt, Supporting Rollers, Sprockets & Chains. It shall be driven by mill.

Sugarcane Feeder shall be Mils Steel.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Crusher Side Gear shall be having hub cut 12 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Juice Collecting bottom Tray shall be Mild Steel.

Juice Sewer Shall Be Mild Steel.

1^ST Mill will be Driven by Planetary Gear box with 25 H.P. Electric Motor.

2^ND Mill will be Driven by Planetary Gear box with 20 H.P. Electric Motor.

Bagasse Carrier shall be 14” wide and length will be 20 feet complete with M.S. Structure & frame work. It shall be driven by 2^nd Mill.

Foundation Bolts for the Mills will be provided.

Spanner Set. Heavy Duty, New System.

Crushing Capacity -2350-2500 Kgs Per Hour / 60 Tons For 24 Hours

Total H.P. = 3+25+20+0.5 = 48.5 H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 SETS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

_{OM KAILASH NO. 3 – DELUXE HEAVY  MODEL                                         WITH PLANETARY GEAR BOX & MOTOR}

              _{242 MM DIA – 242 MM LENGTH - Size -9½”x  10”}

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 242 mm – Length - 254 mm, 

B - Roller Dia - 242 mm – Length - 254 mm, 

C - Roller Dia - 222 mm – Length - 254 mm, 

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

100 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Halter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher Side Cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Planetary Gear Box with 15 H.P. Electric Motor -1 NOS.

Spanner Set.

Crushing Capacity -1150-1250 Kgs per hour / 30 Ton for 24 hours

Coupling Rpm-7 / 8

Additional Information:

• Production Capacity: 25 NOS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

OM KAILASH NO. 2 – TOTAL HEAVY  MODEL 
SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
213 MM Dia – 216 MM LENGTH - Size -8½” x  8½” 

mills-1, c. I. Rollers - 3 , graded roller’s,
a-roller dia- 213 mm – length- 216 mm, a-roller groove- 6 mm,
b-roller dia- 213 mm – length- 216 mm, b-roller groove- 6 mm,
c-roller dia- 196 mm – length- 216 mm, c-roller groove- 12 mm,
90 mm thickness graded shafts,
gun metal full (round)bush,
tepper roller bearing,
oil bath rain proof helical gear box,
master gear helical,
master gear pinion helical,
intermediate gear helical,
fast pulley pinion helical,
crusher side gear helical-11 teeth,
long stud, setting key for b&c rollers,
heavy & big grease cup & pipes,
b&c roll bush holter of m. S. Forged,
heavy duty a,b&c roller scraper,
crushing capacity -850-1050kgs per hour / 25 ton for 24hours
pulley – 29” x 1. 75” hole, pulley rpm -180,
single coupling, coupling rpm -7 / 8,
motor h. P. Required – 7.5/10 h. P.  
diesel engine h. P. Required – 15 h. P.
apx. Weight -925 kgs

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY TRANSPORT
• Production Capacity: 20 NOS PER MONTH
• Delivery Time: 1 WEEK

Product Details:

OM KAILASH NO. 2 – REGULAR  MODEL 
SUGARCANE CRUSHER WITH HELICAL GEAR BOX
213 MM Dia – 216 MM LENGTH - Size -8½” x  8½”  

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 213mm – Length - 216 mm,

B - Roller Dia - 213 mm – Length - 216 mm,

C - Roller Dia - 196 mm – Length - 216 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

90 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush half round with C.I. half Bush Holder.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Holder to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Oil bath Rain proof Helical Gear Box.

Gear Box cover shall be fabricated from M.S. Sheet.

Tapper Roller Bearings.

Master Gear Straight, Master Gear Pinion Straight.

Intermediate Gear Straight, Fast Pulley Pinion Straight.

Crushing Capacity -700-800 Kgs Per Hour / 20 Ton for 24 Hours.

Crusher Pulley Plain – 29” x 1.75” hole, Pulley Rpm -180.

Single Coupling, Coupling Rpm -7 / 8.

Motor  H.P.  Required – 7.5  H.P.

Diesel Engine H.P. Required – 12 H.P.

Apx. Weight -875 Kgs.

Additional Information:

• Production Capacity: 25 NOS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

OM KAILASH NO. 3 – DELUXE HEAVY  MODEL 

SUGARCANE CRUSHER

242 MM Dia – 242 MM LENGTH - Size -9½” x  9½” 

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 242 mm – Length - 242 mm, A-Roller Groove- 6 mm.

B - Roller Dia - 242 mm – Length - 242 mm, B- Roller Groove - 6 mm.

C - Roller Dia - 222 mm – Length - 242 mm, C- Roller Groove - 12 mm.

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

100 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Halter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Feeder shall be fabricated from Mild Steel plates.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from M.S. Sheet

Tapper Roller  Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Helical, Fast Pulley Pinion Helical,

Crushing Capacity -1100-1250 Kgs Per Hour / 30 Ton for 24 Hours

Crusher Pulley Plain – 29” x 1.75” hole, Pulley Rpm -180,

Single Coupling, Coupling Rpm -7 / 8,

Motor  H.P.  Required – 12.5  H.P.

Apx. Weight -1300 Kgs

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 50 PCS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

Om kailash no. 6-super jumbo-total heavy
double mill sugarcane crusher with planetary gear boxes, cane carrier, bagasse carrier, spring system & auto lubricating system

90-100 tcd sugarcane crushing plant

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1 SET PER MONTH
• Delivery Time: 5-6 WEEKS

Product Details:

OM KAILASH NO. 2 – TOTAL HEAVY  MODEL 
SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
213 MM Dia – 216 MM LENGTH - Size -8½” x  8½” 

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 213mm – Length - 216 mm,

B - Roller Dia - 213 mm – Length - 216 mm,

C - Roller Dia - 196 mm – Length - 216 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

90 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Holter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from M.S. Sheet

Tapper Roller  Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Helical, Fast Pulley Pinion Helical,

Crushing Capacity -850-1050 Kgs Per Hour / 25 Ton for 24 Hours

Crusher Pulley Plain – 29” x 1.75” hole, Pulley Rpm -180,

Single Coupling, Coupling Rpm -7 / 8,

Motor  H.P.  Required – 7.5/10  H.P.

Diesel Engine H.P. Required – 15 H.P. 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 25 NOS PER MONTH
• Delivery Time: 1 WEEK

Product Details:

OM KAILASH NO. 3  DELUXE LIGHT MODEL 
SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
242 MM Dia  242 MM LENGTH  Size 9 x  9 

^{Mills-1, C.I. Graded Rollers  3.}

^{A - Roller Dia - 242 mm  Length - 242 mm,} 

^{B - Roller Dia - 242 mm  Length - 242 mm,} 

^{C - Roller Dia - 222 mm  Length - 242 mm,} 

^{Mill base fabricated from M.S. Channels.}

^{Side Plate fabricated from tested mild steel plates.}

^{90 mm Thick Graded M.S. Shafts.}

^{Gun Metal top Roller Bush half square/half round.}

^{Gun Metal B&C Roller Bush Half round with C.I. Bush Halter.}

^{Top Caps fabricated from M.S. Plates.}

^{Side Caps fabricated from M.S. Plates.}

^{Long Studs to hold the Side Caps from the both sides.}

^{Setting Keys for B&C Roller Halter to avoid movement.}

^{Heavy & Big Grease Cup & Pipes.}

^{A,B Roller Scrapers fabricated from M.S. plates.}

^{C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.}

^{Crusher Side Gear shall be having hub cut 13 teeth.}

^{Crusher side cover shall be fabricated from M.S. Sheet.}

^{Sugarcane Feeder shall be fabricated from Mild Steel plates.}

^{Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.}

^{Juice Collecting bottom Tray shall be Mild Steel.}

^{Oil bath Rain proof Helical Gear Box,}

^{Gear Box cover shall be fabricated from M.S. Sheet}

^{Tapper Roller  Bearings,}

^{Master Gear Helical, Master Gear Pinion Helical,}

^{Intermediate Gear Helical, Fast Pulley Pinion Helical,}

^{Crushing Capacity - 25 Ton for 24 Hours}

^{Crusher Pulley Plain  29 x 1.75 hole, Pulley Rpm -180,}

^{Single Coupling, Coupling Rpm -7 / 8,}

^{Motor  H.P.  Required 12.5  H.P.}

Additional Information:

• Item Code: 2WEEKS
• Production Capacity: 25 NOS PER MONTH

Product Details:

OM KAILASH NO. 1.5 – HEAVY MODEL
SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
190 MM Dia – 190 MM LENGTH - Size -7.5” x  7.5”

Mills-1, Cast Iron Graded Rollers – 3.

A-    Roller Dia - 190 mm – Length - 190 mm,

B-    Roller Dia - 190 mm – Length - 190 mm,

C-     Roller Dia - 175 mm – Length - 190 mm,

Mill base fabricated from Mild Steel channels.

Side Plate fabricated from tested mild steel plates.

70 mm Thick Graded M.S. Shafts.

A,B & C Roller Gun Metal Full Round Bush with Holder.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Holder to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Single Coupling - Rpm -7 / 8.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from M.S. Sheet

Tapper Roller  Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Straight, Fast Pulley Pinion Straight,

Crushing Capacity -350-400 Kgs Per Hour / 10 Tons For 24 Hours.

H.P. Required – 5 H.P., Diesel Engine H.P. Required – 8 H.P.

Additional Information:

• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

OM KAILASH NO. 2 – HEAVY MODEL
SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
203 MM Dia – 203 MM LENGTH - Size -8” x 8” 

Mills-1, Cast Iron Graded Rollers – 3.

A-    Roller Dia - 203 mm – Length - 203 mm,

B-    Roller Dia - 203 mm – Length - 203 mm,

C-     Roller Dia - 183 mm – Length - 203 mm,

Mill base fabricated from Mild Steel channels.

Side Plate fabricated from tested mild steel plates.

80 mm Thick Graded M.S. Shafts.

A,B & C Roller Gun Metal Full Round Bush with Holder.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Holder to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Single Coupling - Rpm -7 / 8.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from M.S. Sheet

Tapper Roller  Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Straight, Fast Pulley Pinion Straight,

Crushing Capacity -550-650 Kgs Per Hour / 15 Tons For 24 Hours.

H.P. Required – 5 H.P., Diesel Engine H.P. Required – 10 H.P.

Appx. Weight – 700 KGS

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 3 NOS PER MONTH
• Delivery Time: 4-5 WEEKS

Product Details:

OM KAILASH NO. 2 – TOTAL HEAVY STAINLESS STEEL ROLLER
SUGARCANE CRUSHER WITH PLANETARY GEAR BOX & MOTOR 
216 MM DIA – 216 MM LENGTH - Size -8½” x  8½” 

Mills-1, Stainless Steel 304 Grade Rollers – 3.

A - Roller Dia - 216mm – Length - 216 mm.

B - Roller Dia - 216 mm – Length - 216 mm.

C - Roller Dia - 196 mm – Length - 216 mm.

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates covered with S.S. Sheet.

90 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Holder.  

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Holder to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from S.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated S.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from S.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Stainless Steel plates.

Juice Collecting bottom Tray shall be Mild Steel covered with S.S. Sheet.

Planetary Gear box  with 7.5 H.P. Electric Motor.

Crushing Capacity -750-850 Kgs Per Hour / 20 Ton for 24 Hours

Single Coupling, Coupling Rpm -7 / 8.

Motor  H.P.  Required – 7.5  H.P.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 NOS PER MONTH
• Delivery Time: 4 WEEKS

Product Details:

OM KAILASH NO. 2  TOTAL HEAVY MODEL 
SUGARCANE CRUSHER WITH PLANETARY GEAR BOX & DIESEL ENGINE ATTACHMENT 
213 MM Dia  216 MM LENGTH - Size -8 x  8

Mills-1, C.I. Graded Rollers  3.

A - Roller Dia - 213mm  Length - 216 mm,

B - Roller Dia - 213 mm Length - 216 mm,

C - Roller Dia - 196 mm  Length - 216 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

90 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Holter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 11 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Feeder shall be fabricated from Mild Steel plates.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Planetary Gear Box, 
Diesel Engine Attachment for engine drive pulley.

Crushing Capacity -850-1050 Kgs Per Hour / 25 Ton for 24 Hours

Single Coupling, Coupling Rpm -7 / 8, 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

Om kailash no. 2 total heavy
sugarcane crusher with planetary gear box, motor & d. E. Attachment

25 tons per day crushing capacity

+ accessories

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 2 WEEKS

Product Details:

Om kailash no. 3 deluxe heavy
sugarcane crusher with planetary gear box & d. E. Attachment

30 tons per day crushing capacity

+ accessories + tax + transportation

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

OM KAILASH NO. 3 – DELUXE HEAVY MODEL

242 MM Dia – 242 MM LENGTH - Size -9½” x 9½”

MILLS-1, C.I. GRADED ROLLERS - 3,

A-ROLLER DIA- 242 MM – LENGTH- 242 MM, A-ROLLER GROOVE- 6 MM,

B-ROLLER DIA- 242 MM – LENGTH- 242 MM, B-ROLLER GROOVE- 6 MM,

C-ROLLER DIA- 242 MM – LENGTH- 222 MM, B-ROLLER GROOVE- 12 MM,

100 MM THICKNESS GRADED SHAFTS,

GUN METAL TOP ROLLER BUSH HALF SQUARE/HALF ROUND,

GUN METAL B&C ROLLER BUSH HALF (ROUND),

TEPPER ROLLER BEARING,

OIL BATH RAIN PROOF HELICAL GEAR BOX,

MASTER GEAR HELICAL, MASTER GEAR PINION HELICAL,

INTERMEDIATE GEAR HELICAL, FAST PULLEY PINION HELICAL,

CRUSHER SIDE GEAR - 13 TEETH,

LONG STUD, SETTING KEY FOR B&C ROLLERS,

HEAVY & BIG GREASE CUP & PIPES,

B&C ROLL BUSH HOLTER OF M.S. FORGED,

HEAVY DUTY A,B&C ROLLER SCRAPER,
CRUSHING CAPACITY -1100-1250KGS PER HOUR / 30 TON FOR 24HOURS

PULLEY PLAIN – 30” x 1.75” HOLE, PULLEY RPM -180,

SINGLE COUPLING, COUPLING RPM -7 / 8,

MOTOR H.P. REQUIRED– 12.5 H.P.

APX.WEIGHT -1325 KGS

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: BY TRANSPORT
• Production Capacity: 30 NOS PER MONTH
• Delivery Time: 1 TO 2 WEEKS

Product Details:

OM KAILASH NO. 3 – DELUXE HEAVY MODEL  
S.S. ROLLER SUGARCANE CRUSHER 
WITH PLANETARY GEAR BOX & MOTOR 
242 MM DIA – 254 MM LENGTH - Size -9½” x  9½” 

Mills-1, S.S. 304 Rollers – 3.

A - Roller Dia - 242 mm – Length - 242 mm,

B - Roller Dia - 242 mm – Length - 242 mm,

C - Roller Dia - 222 mm – Length - 242 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

100 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Halter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from S.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated S.S. plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher side cover shall be fabricated from S.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from S.S. plates.

Juice Collecting bottom Tray shall be Mild Steel covered with S.S. Sheets.

Mill will be Driven by Planetary Gear box with 15 H.P. Electric Motor.

Foundation Bolts for the Mill will be provided.

Spanner Set.

Crushing Capacity -950-1050 Kgs Per Hour / 25 Ton for 24 Hours

Single Coupling, Coupling Rpm -7 / 8,

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 25 TON PER 24 HRS
• Delivery Time: 3 WEEKS

Product Details:

OM KAILASH NO.3 – DELUX SMART TOTAL HEAVY 
DOUBLE MILL SUGARCANE CRUSHER WITH PLANETARY GEAR BOXES & MOTORS 
247 MM Dia – 254 MM LENGTH  

Mills-2, C.I. Graded Rollers – 6.

A - Roller Dia - 247 mm – Length - 254 mm.

B - Roller Dia - 247 mm – Length - 254 mm.

C - Roller Dia - 222 mm – Length - 254 mm.

Mill base fabricated from M.S. Channels.

Mill Foundation for both Mills Fabricated Mild Steel channels.

Side Plate fabricated from tested mild steel plates.

110 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Halter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher Side Cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel Covered with S.S. Sheet.

Juice Gutter Shall be Stainless Steel.

Intermediate Carrier side plates shall be Mild Steel, Type – Belt Type driven by mills with sprockets and chain.

1^ST Mill Planetary Gear Box with 15 H.P. Electric Motor.

2^ND Mill Planetary Gear Box with 15 H.P. Electric Motor.

Crushing Capacity appx 35-40 Ton for 24 Hours.

Coupling Rpm -7 / 8.

Motor  H.P.  Required – 15 +15 = 30 H.P.

Including Foundation Bolts, Spanner set.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 2 SETS PER MONTH
• Delivery Time: 4 WEEKS

Product Details:

OM KAILASH NO. 3 – DELUXE HEAVY  MODEL 
STAINLESS STEEL ROLLER SUGARCANE CRUSHER WITH HELICAL GEAR BOX 
242 MM Dia – 242 MM LENGTH - Size -9½” x  9½”  

Mills-1, S.S. 304 Graded Rollers – 3.

A - Roller Dia. - 242 mm – Length - 242 mm,

B - Roller Dia. - 242 mm – Length - 242 mm,

C - Roller Dia. - 222 mm – Length - 242 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates covered with S.S. sheet.

100 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Halter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from S.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated S.S. plates.

Crusher Side Gear shall be having hub cut 13 teeth.

Crusher side cover shall be fabricated from S.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from S.S. plates.

Juice Collecting bottom Tray shall be Mild Steel covered with S.S. sheet.

Oil bath Rain proof Helical Gear Box,

Gear Box cover shall be fabricated from S.S. Sheet

Tapper Roller Bearings,

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Helical, Fast Pulley Pinion Helical,

Crushing Capacity -950-1050 Kgs Per Hour / 25 Ton for 24 Hours

Crusher Pulley Plain – 29” x 1.75” hole, Pulley Rpm -180,

Single Coupling, Coupling Rpm -7 / 8,

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 NOS PER MONTH
• Delivery Time: 1 MONTH

Product Details:

OM KAILASH NO. 5 –JUMBO HEAVY KING SIZE MODEL 
SUGARCANE CRUSHER DOUBLE COUPLING WITH HELICAL GEAR BOX 
267 MM Dia – 305 MM LENGTH - Size -10½” × 12”

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 267 mm – Length – 305 mm,

B - Roller Dia - 267 mm – Length - 305 mm,

C - Roller Dia - 241 mm – Length – 305 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

110 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush full round with M.S. forged Bush Holder.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Holder to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 14 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Double Coupling - Rpm -7 / 8.

Tell Bar system to couple the Gear Box with Crusher with Coupling.

Oil bath Rain proof Helical Gear Box.

Gear Box cover shall be fabricated from M.S. Sheets.

Tapper Roller Bearings.

Master Gear Helical, Master Gear Pinion Helical,

Intermediate Gear Helical, Fast Pulley Pinion Helical.

Crusher Pulley Plain – 29” x 2” hole, Pulley Rpm -240.

Crushing Capacity -1500-1700 Kgs Per Hour /40 Ton for 24 Hours.

Apx. Weight -1900 Kgs.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 3-4 WEEKS

Product Details:

om kailash no. 4 – super delux model 
sugarcane crusher with planetary gear box & motor  
267 mm dia – 267 mm length - size -10½” x 10½” 

mills-1, c. I. Graded rollers – 3.

a - roller dia - 267 mm – length - 267 mm,

b - roller dia - 267 mm – length - 267 mm,

c - roller dia - 247 mm – length - 267 mm,

mill base fabricated from m. S. Channels.

side plate fabricated from tested mild steel plates.

110 mm thick graded m. S. Shafts.

gun metal top roller bush half square/half round.

gun metal b&c roller bush half round with c. I. Half bush holter.

top caps fabricated from m. S. Plates.

side caps fabricated from m. S. Plates.

long studs to hold the side caps from the both sides.

setting keys for b&c roller halter to avoid movement.

heavy & big grease cup & pipes.

a,b roller scrapers fabricated from m. S. Plates.

c-roll scraper stand & c-roll scrape fabricated m. S. Plates.

crusher side gear shall be having hub cut 14 teeth.

crusher side cover shall be fabricated from m. S. Sheet.

sugarcane feeder shall be fabricated from mild steel plates.

sugarcane bagasse exit window shall be fabricated from mild steel plates.

juice collecting bottom tray shall be mild steel.

planetary gear box with 15 h. P. Crompton make electric motor – 1 nos.

spanner set.

crushing capacity -1350-1450 kgs per hour / 35 ton for 24 hours.

single coupling, coupling rpm -7 / 8.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 3 WEEKS

Product Details:

OM KAILASH NO. 4 – SUPER DELUXE MODEL  
WITH PLANETARY GEAR BOX & MOTOR 
267 MM Dia – 267 MM LENGTH - Size -10½” x 10½”  

Mills-1, C.I. Graded Rollers – 3.

A - Roller Dia - 267 mm – Length - 267 mm,

B - Roller Dia - 267 mm – Length - 267 mm,

C - Roller Dia - 247 mm – Length - 267 mm,

Mill base fabricated from M.S. Channels.

Side Plate fabricated from tested mild steel plates.

110 mm Thick Graded M.S. Shafts.

Gun Metal top Roller Bush half square/half round.

Gun Metal B&C Roller Bush Half round with M.S. Forged Full Bush Holter.

Top Caps fabricated from M.S. Plates.

Side Caps fabricated from M.S. Plates.

Long Studs to hold the Side Caps from the both sides.

Setting Keys for B&C Roller Halter to avoid movement.

Heavy & Big Grease Cup & Pipes.

A,B Roller Scrapers fabricated from M.S. plates.

C-roll Scraper Stand & C-roll Scrape fabricated M.S. plates.

Crusher Side Gear shall be having hub cut 14 teeth.

Crusher side cover shall be fabricated from M.S. Sheet.

Sugarcane Feeder shall be fabricated from Mild Steel plates.

Sugarcane Bagasse Exit Window shall be fabricated from Mild Steel plates.

Juice Collecting bottom Tray shall be Mild Steel.

Planetary Gear Box with 15 H.P. Crompton Make Electric Motor – 1 Nos.

Spanner Set.

Crushing Capacity -1350-1450 Kgs Per Hour / 35 Ton for 24 Hours.

Single Coupling, Coupling Rpm -7 / 8.

without motor

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5 NOS PER MONTH
• Delivery Time: 2-3 WEEKS

Product Details:

Om kailash no. 8 grand jumbo sugarcane crusher

75 ton crushing capacity

+ accessories + tax + transportation

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 1 NOS PER MONTH
• Delivery Time: 1 MONTH

Product Details:

Om Kailash No.3 Deluxe King - T.H
Single Mill - (F.B) Sugarcane Crusher

Additional Information:

• Production Capacity: 10 NOS PER MONTH
• Delivery Time: 3 WEEKS